TasDia Network
TasDia Network

MCQs 1: If a body is lying on a plane whose inclination with the horizontal is less than the angle of friction, then___________________?
1) a force is required to move the body upwards
2) a force is required to move the body downward
3) the body will not be in equilibrium
The correct answer is?

only (1) only (2) both (1) and (2) both (1) and (3)
Answer Explanation

MCQs 2: A ladder of weight ‘w’ rests against a smooth vertical wall, and rests on rough horizontal ground, the coefficient of friction between the ladder and the ground being 1/4. The maximum angle of inclination of the ladder to the vertical, if a man of weight ‘w’ is to walk to the top of it safely, is tan’1 x, where x is___________________?

1/4 1/3 3 4
Answer Explanation

MCQs 3: The shape of a suspended cable for a uniformly distributed load over it is__________________?

circular parabolic catenary cubic parabola
Answer Explanation

MCQs 4: A light rope is loaded with many equal weights at equal horizontal intervals. The points of suspension on the rope lie on a_____________________?

parabola catenary cycloid ellipse
Answer Explanation

MCQs 5: A ball moving on a smooth horizontal table hits a rough vertical wall, the coefficient of restitution between ball and wall being 1/3. The ball rebounds at the same angle. The fraction of its kinetic energy lost is___________________?

1/3 2/3 1/9 8/9
Answer Explanation

MCQs 6: A ball is dropped from a height of 16 m on a horizontal floor. If it rebounds to a height of 9 m after striking the floor, the coefficient of restitution between ball and floor is_____________________?

1/4 2/3 3/4 4/3
Answer Explanation

MCQs 7: When a body slides down an inclined surface, the acceleration of the body is given by__________________?

g gsinG g cos 6 g tan 6
Answer Explanation

MCQs 8: A shell travelling with a horizontal velocity of 100 m/sec explodes and splits into two parts, one of mass 10 kg and the other of 15 kg. The 15 kg mass drops vertically downward with initial velocity of 100 m/sec and the 10 kg mass begins to travel at an angle to the horizontal of tan”1 x, where x is______________________?

3/4 4/5 5/3 3/5
Answer Explanation

MCQs 9: A shell of mass 100 kg travelling with a velocity of 10 m/sec breaks into two equal pieces during an explosion which provides an extra kinetic energy of 20000 Joules. If the pieces continue to move in the same direction as before, then the speed of the faster one must be____________________?

20 m/sec 30 m/sec 40 m/sec 50 m/sec
Answer Explanation

MCQs 10: Two objects moving with uniform speeds are 5 m apart after 1 second when they move towards each other and are 1 m apart when they move in the same direction. The speeds of the objects are____________________?

2 m/sec and 2 m/sec 3 m/sec and 2 m/sec 3 m/sec and 3 m/sec 4 m/sec and 6 m/sec
Answer Explanation

MCQs 11: The angular speed of a car taking a circular turn of radius 100 m at 36 km/hr will be___________________?

0.1 rad/sec 1 rad/sec 10 rad/sec 100 rad/sec
Answer Explanation

MCQs 12: The condilion for a lifting machine to be reversible is that its efficiency should be_________________?

less than 50% more than 50% more than 66.67% equal to 100%
Answer Explanation

MCQs 13: In a lifting machine with efficiency 60%, an effort of 200 N is required to raise a load of 6 kN. The velocity ratio of the machine is_____________________?

30 50 60 80
Answer Explanation

MCQs 14: A system of copianar forces acting on a rigid body can be reduced to________________?

one force only one couple only one force and one couple only none of the above
Answer Explanation

MCQs 15: Force polygon method is applicable for_____________________?

any copianar force system a system of parallel forces only concurrent copianar force system non-concurrent copianar force system
Answer Explanation

MCQs 16: The diagram showing the point of application and line of action of forces in their plane is called____________________?

vector diagram space diagram force diagram funicular diagram
Answer Explanation

MCQs 17: The bending moment in an arch is proportional to___________________?

vertical ordinate of funicular polygon vertical ordinate of the arch intercept between the arch axis and the funicular polygon none of these
Answer Explanation

MCQs 18: An ordinate in a funicular polygon represents__________________?

shear force resultant force bending moment equilibrium
Answer Explanation

MCQs 19: In which of the following trusses, the method of substitution is required for determining the forces in all the members of the truss by graphic statics ?

howe truss king post truss fink truss warren truss
Answer Explanation

MCQs 20: The number of funicular polygons which can be drawn to pass through two specified points in the space diagram are__________________?

zero 1 2 infinity
Answer Explanation

Related Topics

About Us | Contact Us | Privacy Policy
ABOUT US
Category
Who We Are

TasDia Network, this platform not only provides you the best educational stuff but besides this, we are creating thousands of new ideas to making your signature and planning much more on a single platform.

© 2020-2023, TasDia Network

All rights of the publication are reserved by tasdia.com.