TasDia Network
TasDia Network

MCQs 1: For a cantilever of effective depth of 0.5m, the maximum span to satisfy vertical deflection limit is______________?

3.5 m 4 m 4.5 m 5 m
Answer Explanation

MCQs 2: Diagonal tension in a beam______________?

is maximum at neutral axis decreases below the neutral axis and increases above the neutral axis increases below the neutral axis and decreases above the neutral axis remains same
Answer Explanation

MCQs 3: According to IS : 456-1978, the cblumn or the strut is the member whose effective length is greater than________________?

the least lateral dimension 2 times the least lateral dimension 3 times the least lateral dimension 4 times the least lateral dimension
Answer Explanation

MCQs 4: For a simply supported beam of span 15m, the minimum effective depth to satisfy the vertical deflection limits should be________________?

600 mm 750 mm 900 mm more than 1 m
Answer Explanation

MCQs 5: According to IS : 456- 1978, minimum slenderness ratio for a short column is_______________?

less than 12 less than 18 between 18 and 24 more than 24
Answer Explanation

MCQs 6: The minimum cover in a slab should neither be less than the diameter of bar nor less than_______________?

10 mm 15 mm 25 mm 13 mm
Answer Explanation

MCQs 7: The ratio of the diameter of reinforcing bars and the slab thickness is_______________?

1/4 1/5 1/6 1/8
Answer Explanation

MCQs 8: The percentage of reinforcement in case of slabs, when high strength deformed bars are used is not less than________________?

0.15 0.12 0.30 1.00
Answer Explanation

MCQs 9: For a longitudinal reinforcing bar in a column, the minimum cover shall neither be less than the diameter of bar nor less than_______________?

15 mm 25 mm 30 mm 40 mm
Answer Explanation

MCQs 10: Lap length in compression shall not be less than______________?

15 4> 20 24 (j) 30 (j)
Answer Explanation

MCQs 11: According to IS : 456-1978, the fiexural strength of concrete is________________?

directly proportional to compressive strength inversely proportional to compressive strength directly proportional to square root of compressive strength inversely proportional to square root of compressive strength
Answer Explanation

MCQs 12: According to IS: 456-1978, the maximum reinforcement in a column is_____________?

2 % 4% 6 % 8 %
Answer Explanation

MCQs 13: Minimum pitch of transverse reinforcement in a column is________________?

the least lateral dimension of the member sixteen times the smallest diameter of longitudinal reinforcement bar to be tied forty-eight times the diameter of transverse reinforcement lesser of the above three values
Answer Explanation

MCQs 14: A continuous beam is deemed to be a deep beam when the ratio of effective span to overall depth (1/D. is less than__________________?

1.5 2.0 2.5 3.0
Answer Explanation

MCQs 15: Minimum thickness of load bearing RCC wall should be_____________?

50 mm 100 mm 150 mm 200 mm
Answer Explanation

MCQs 16: In reinforced concrete footing on soil, the minimum thickness at edge should not be less than______________?

100 mm 150 mm 200 mm 250 mm
Answer Explanation

MCQs 17: The slab is designed as one way if the ratio of long span to short span is_____________?

less than 1 between 1 and 1.5 between 1.5 and 2 greater than 2
Answer Explanation

MCQs 18: If the storey height is equal to length of RCC wall, the percentage increase in strength is_____________?

0 10 20 30
Answer Explanation

MCQs 19: Critical section for shear in case of flat slabs is at a distance of_______________?

effective depth of slab from periphery of column/drop panel d/2 from periphery of column/capital/ drop panel at the drop panel of slab at the periphery of column
Answer Explanation

MCQs 20: The average permissible stress in bond for plain bars in tension is_______________?

increased by 10% for bars in compression increased by 25% for bars in compression decreased by 10% for bars in compression decreased by 25% for bars in compression
Answer Explanation

Related Topics

About Us | Contact Us | Privacy Policy
ABOUT US
Category
Who We Are

TasDia Network, this platform not only provides you the best educational stuff but besides this, we are creating thousands of new ideas to making your signature and planning much more on a single platform.

© 2020-2023, TasDia Network

All rights of the publication are reserved by tasdia.com.