TasDia Network
TasDia Network

MCQs 1: The recommended value of modular ratio for reinforced brick work is______________?

18 30 40 58
Answer Explanation

MCQs 2: In T-shaped R C. retaining walls, the main reinforcement in the stem is provided on______________?

the front face in one direction the front face in both directions the inner face in one direction the inner face in both directions
Answer Explanation

MCQs 3: Select the correct statement _?

Elastic modulus of high tensile steel is nearly the same as that of mild steel Elastic modulus of high tensile steel is more than that of mild steel Carbon percentage in high carbon steel is less than that in mild steel High tensile steel is cheaper than mild steel
Answer Explanation

MCQs 4: Select the incorrect statement _?

Lean mixes bleed more as compared to rich ones Bleeding can be minimized by adding pozzuolana finer aggregate Bleeding can be increased by addition ‘of calcium chloride none of the above
Answer Explanation

MCQs 5: The effect of adding calcium chloride in concrete is________________?
1. to increase shrinkage
2. to decrease shrinkage
3. to increase setting time
4. to decrease setting time
The correct answer is?

(1) and (3) (1)and(4) (2)and (3) (2)and (4)
Answer Explanation

MCQs 6: Examine the following statements ___________?
1. Factor of safety for steel should be based on its yield stress,
2. Factor of safety for steel should be based on its ultimate stress,
3. Factor of safety for concrete should be based on its yield stress,
4. Factor of safety for concrete should be based on its ultimate stress.
The correct statements are

(1) and (3) (1) and(4) (2) and (3) (2) and (4)
Answer Explanation

MCQs 7: In counterfort type retaining walls_____________?
1. the vertical slab is designed as a continuous slab
2. the heel slab is designed as a continuous slab
3. the vertical slab is designed as a cantilever
4. the heel slab is designed as a cantilever
The correct answer is?

(1) and (ii) (1) and(4) (2) and (3) (3) and (4)
Answer Explanation

MCQs 8: The main reinforcement in the toe of a T- shaped R C. retaining wall is provided on_______________?
1. top face parallel to the wall
2. top face perpendicular to the wall
3. bottom face paralleUo the wall
4. bottom face perpendicular to the wall
The correct answer is ?

only (2) is correct (1) and (2)are correct (3) and (4) are correct only (4) is correct
Answer Explanation

MCQs 9: In a counterfort retaining wall, the main reinforcement is provided on the_______________?
1. bottom face in front counterfort
2. inclined face in front counterfort
3. bottom face in back counterfort
4. inclined face in back counterEort
The correct answer is

(1) and (ii), (2) and (3) (1) and (4) (3) and (4)
Answer Explanation

MCQs 10: In the design of a front counterfort in a counterfort retaining wall, the main reinforcement is provided on_______________?
1. bottom face near counterfort
2. top face near counterfort
3. bottom face near centre of span
4. top face near centre of span The correct answer is

only (1) only (2) both (1) and (4) both (2)and (3)
Answer Explanation

MCQs 11: The depth of footing for an isolated column is governed by______________?
1. maximum bending moment
2. shear force
3. punching shear
The correct answer is?

only (1) (1) and (2) (1) and (3) (1), (2) and (3)
Answer Explanation

MCQs 12: Shrinkage of concrete depends upon_____________?
1. humidity of atmosphere
2. passage of time
3. stress
The correct answer is?

(1) and (2) (2)and (3) only (3) All (1), (2)and (3)
Answer Explanation

MCQs 13: Sinking of an intermediate support of a continuous beam_____________?
1. reduces the negative moment at support
2. increases the negative moment at support
3. reduces the positive moment at center of span
4. increases the positive moment at center of span
The correct answer is?

(1) and (3) (1) and(4) (2 )and (3) (2) and (4)
Answer Explanation

MCQs 14: In a ring beam subjected to uniformly distributed load______________?
1. shear force at mid span is zero
2. shear force at mid span is maximum
3. torsion at mid span is zero
4. torsion at mid span is maximum
The correct answer is ?

(1) and (3) (1) and (4) (2) and (3) (2) and (4)
Answer Explanation

MCQs 15: Select the incorrect statement __?

The loss of prestress is more in pre-tensioning system than in post-tensioning system Pretensioning system has greater certainty about its durability For heavy loads and large spans in buildings or bridges, post-tensioning system is cheaper than pretensioning system none of the above
Answer Explanation

MCQs 16: Select the correct statement __?

Elastic modulus of high tensile steel is nearly the same as that of mild steel Elastic modulus of high tensile steel is more than that of mild steel Carbon percentage in high carbon steel is less than that in mild steel High tensile steel is cheaper than mild steel
Answer Explanation

Related Topics

About Us | Contact Us | Privacy Policy
ABOUT US
Category
Who We Are

TasDia Network, this platform not only provides you the best educational stuff but besides this, we are creating thousands of new ideas to making your signature and planning much more on a single platform.

© 2020-2023, TasDia Network

All rights of the publication are reserved by tasdia.com.