- Home
- Category
- Civil Engineering Mcqs
- Irrigation, Water Resources Engineering & Hydrology Mcqs
- Irrigation, Water Resources Engineering & Hydrology Mcqs - Set 1
MCQs 1: The value of Sodium Absorption Ratio for high sodium water lies between________________?
MCQs 2: Irrigation water having the concentration of Na++ , Ca++ and Mg++ as 20, 3 and 1 Milli equivalent per litre respectively will be classified as__________________?
MCQs 3: The “outlet discharge factor” is the duty at the head of_________________?
MCQs 4: For supplying water to rabi crop, kharif crop and sugarcane, the channel is designed for a capacity equal to the greater of the water requirement of_______________?




MCQs 5: The water utilizable by plants is available in soils mainly in the form of________________?
MCQs 6: With the increase in the quantity of water supplied, the yield of most crops_________________?




MCQs 7: Infiltration rate is always________________?




MCQs 8: Infiltration capacity_________________?
MCQs 9: If the intensity of rainfall is more than the infiltration capacity of soil, then the infiltration rate will be______________?




MCQs 10: Which of the following is a non-recording raingauge ?




MCQs 11: Which of the following types of rain gauges is used for measuring rain in remote hilly inaccessible areas ?
MCQs 12: A 70% index of wetness means_______________?
MCQs 13: Assertion A : To estimate the rainfall over a catchment, the number of raingauges required per unit area is large for hilly areas. Reason R : Rainfall gradient is steep. Select your correct answer according to the coding system given below ?




MCQs 14: Unit of runoff in M.K.S. system is________________?
MCQs 15: The area between the isohyets 45 cm and 55 cm is 100 square km and between 55 cm and 65 cm is 150 square km. The average depth of annua! precipitation over the above basin of 250 square km will be__________________?
MCQs 16: If it rains between 2 P.M. and 3 P.M. and the entire basin area just starts contributing water at 3 P.M. to the outlet, then time of concentration will be_____________________?
MCQs 17: The normal annual precipitation at stations X, A, B and C are 700 mm, 1000 mm, 900 mm and 800 mm respectively. If the storm precipitation at three station A, B and C were 100 mm, 90 mm and 80 mm respectively, then the storm precipitation for station X will be___________________?
MCQs 18: The unit hydrograph due to a storm may be obtained by dividing the ordinates of the direct runoff hydrograph by_______________?
MCQs 19: S-hydrograph is used to obtain unit hydrograph of________________?




MCQs 20: Dimensions of coefficient of transmissibility are______________?
- Airport Engineering Mcqs
- Applied Mechanics & Graphic Statics Mcqs
- Building Materials & Construction Mcqs
- Construction Planning & Management Mcqs
- Design of Concrete Structures Mcqs
- Design of Masonry Structures Mcqs
- Design of Steel Structures Mcqs
- Dock & Harbor Engineering Mcqs
- Elements of Remote Sensing Mcqs
- Engineering Economy Mcqs
- Environmental Engineering Mcqs
- Estimating & Costing Mcqs
- Fluid Mechanics Mcqs
- Highway Engineering Mcqs
- Hydraulics & Fluid Mechanics Mcqs
- Irrigation, Water Resources Engineering & Hydrology Mcqs
- Railway Engineering Mcqs
- RCC Structures Design Mcqs
- Soil Mechanics & Foundation Engineering Mcqs
- Strength of Materials Mcqs
- Structural Analysis Mcqs
- Structural Design Specifications Mcqs
- Surveying Mcqs
- Theory of Structures Mcqs
- Tunnel Engineering Mcqs
- Waste Water Engineering Mcqs
ABOUT US
Category
Who We Are
TasDia Network, this platform not only provides you the best educational stuff but besides this, we are creating thousands of new ideas to making your signature and planning much more on a single platform.
All rights of the publication are reserved by tasdia.com.