- Home
- Category
- Civil Engineering Mcqs
- Irrigation, Water Resources Engineering & Hydrology Mcqs
- Irrigation, Water Resources Engineering & Hydrology Mcqs - Set 6
MCQs 1: The major resisting force in a gravity dam is___________________?
MCQs 2: Horizontal acceleration due to earthquake results in______________?
MCQs 3: The uplift pressure on a dam can be controlled by_________________?
1) constructing cutoff under upstream face
2) constructing drainage channels bet-ween the dam and its foundation
3) by pressure grouting in foundation
The corret answer is?
MCQs 4: The total capacity of a reservoir is 25 million cubic metres and dead storage is 5 million cubic metres. If the average volume of sediment deposition is 0.10 million cubic metre per year, then the usefulness of the reservoir will start reducing after_________________?
MCQs 5: For a flood control reservoir, the effective storage is equal to_______________?




MCQs 6: The useful storage is the volume of water stored in the reservoir between________________?




MCQs 7: A deep well_________________?




MCQs 8: If d is the depth of the aquifer through which water is flowing, then the relationship between permeability k and transmissible T is given by_______________?
MCQs 9: The relation between probability (P) and recurrence interval (T) is given by_________________?
MCQs 10: The unit hydrograph of a specified duration can be used to evaluate the hydrograph of storms of_________________?
MCQs 11: The best unit duration of storm for a unit hydrograph is________________?
MCQs 12: The rainfall on five successive days were measured as 100 mm, 80 mm, 60 mm, 40 mm and 20 mm respectively. If the infiltration index or the storm loss rate for the catchment area is earlier estimated as 50 mm/day, the total surface run off will be________________?
MCQs 13: A current meter is used to measure the__________________?
MCQs 14: The runoff increases with________________?




MCQs 15: When surface of transpiration is submerged under water, then potential evapotranspiration is________________?




MCQs 16: Under the same conditions, which of the following shapes of water surface will give the highest rate of evaporation ?
MCQs 17: A raingauge should preferably be fixed________________?
MCQs 18: Cyclonic precipitation is caused by lifting of an air mass due to________________?
MCQs 19: Infiltration is the_______________?




MCQs 20: The depth of water required to bring the soil moisture content of a given soil upto its field capacity is called_________________?
- Airport Engineering Mcqs
- Applied Mechanics & Graphic Statics Mcqs
- Building Materials & Construction Mcqs
- Construction Planning & Management Mcqs
- Design of Concrete Structures Mcqs
- Design of Masonry Structures Mcqs
- Design of Steel Structures Mcqs
- Dock & Harbor Engineering Mcqs
- Elements of Remote Sensing Mcqs
- Engineering Economy Mcqs
- Environmental Engineering Mcqs
- Estimating & Costing Mcqs
- Fluid Mechanics Mcqs
- Highway Engineering Mcqs
- Hydraulics & Fluid Mechanics Mcqs
- Irrigation, Water Resources Engineering & Hydrology Mcqs
- Railway Engineering Mcqs
- RCC Structures Design Mcqs
- Soil Mechanics & Foundation Engineering Mcqs
- Strength of Materials Mcqs
- Structural Analysis Mcqs
- Structural Design Specifications Mcqs
- Surveying Mcqs
- Theory of Structures Mcqs
- Tunnel Engineering Mcqs
- Waste Water Engineering Mcqs
ABOUT US
Category
Who We Are
TasDia Network, this platform not only provides you the best educational stuff but besides this, we are creating thousands of new ideas to making your signature and planning much more on a single platform.
All rights of the publication are reserved by tasdia.com.