Structural Design Specifications Mcqs | Set 1

MCQs 1: Removal of props under______________?

slabs spanning upto 4.5 m is 14 days

beams spanning upto 6 m is 14 days

slabs spanning upto 4.5 m is 7 days

All the above

Answer Explanation

MCQs 2: The spans of filler joists supporting a slab may be considered approximately equal if the longest span does not exceed the shortest span more than__________________?

10%

15%

25%

Answer Explanation

MCQs 3: All reinforcement should be free from_________________?

paints

loose rust

loose mill scales

All the above

Answer Explanation

MCQs 4: The permissible bending stresses Pbet for steel slab bases should not exceed_______________?

1500 kg/cm2

1650 kg/cm2

1800 kg/cm2

1890 kg/cm2

Answer Explanation

MCQs 5: Pick up the correct statement from the following?

For steel castings, the minimum tensile strength is 41 kg/mm2 and minimum yield stress is 20.5 kg/mm2

For high tensile steel, the minimum tensile strength is 58 kg/mm2

For mild steel the minimum tensile strength is 44 kg/mm2 and minimum elongation of 23% on a gauge length of 5.65A

All the above

Answer Explanation

MCQs 6: The anchorage value of standard U-type hook of a reinforcing bar of diameter d in tension, is______________?

4 d

12 d

16 d

Answer Explanation

MCQs 7: Pick up the correct statement for the web stiffeners?

d is the distance between flange angles or the clear distance between flanges

vertical stiffeners are spaced at a distance not greater than 1.5 d and not less than 0.33 d

for horizontal stiffeners, d is the clear distance between the horizontal stiffener and the tension flange

all the above

Answer Explanation

MCQs 8: Moist sand may contain surface water by mass upto__________________?

1.25%

2.5%

5.0%

7.5%

Answer Explanation

MCQs 1: Removal of props under______________?

MCQs 2: The spans of filler joists supporting a slab may be considered approximately equal if the longest span does not exceed the shortest span more than__________________?

MCQs 3: All reinforcement should be free from_________________?

MCQs 4: The permissible bending stresses Pbet for steel slab bases should not exceed_______________?

MCQs 5: Pick up the correct statement from the following?

MCQs 6: The anchorage value of standard U-type hook of a reinforcing bar of diameter d in tension, is______________?

MCQs 7: Pick up the correct statement for the web stiffeners?

MCQs 8: Moist sand may contain surface water by mass upto__________________?

Related Topics